Medical Equipment
CENTURIAL mainly provides machines (production line), technical service and molds for endotracheal tube (standard/reinforced), silicone foley catheter, latex foley catheter, anesthesia mask, silicone laryngeal mask, urine bag, etc. In addition, to meet the diverse needs of our customers, we also customize special medical tubes and components. And supply customers with product consulting and services freely, from clean room assistance, staffing, technical support, machine installation, staffs training, product quality control, production management, as well as product technical files support, and product registration assistance. If necessary, paid after-sales service is optional, and we will dispatch technical engineers/technicians to the responsible company for on-site planning guidance and training. These are value-added services that we provide to customers, hoping that can solve customer’s worries and produce high quality products in line with customer requirements.
Send your inquiry
Machine name: Automatic Assembly Machine for Medical Check Valves
Machine function:
Used for automatic assembly of check valve assembly, with automatic loading, automatic assembly, automatic detection, function, Can optionally add valve leakage test function and ultrasonic welding technology.
Machine Specification:
1. Control Mode: PLC Control
2. Machine Size: L2000*W1200*H1800MM
3. Capacity: 2200-6500pcs/hour
4. Voltage: 220V
5. Pressure: 0.6Mpa
6. Power:2KW
7. Weight: 2000KG
8. 0ption：Can optionally add valve leakage test function and ultrasonic welding technology
Technical features:
1. Servo system controls, high-speed automated equipment to produce high quality check valves, final yield up to 99%
2. Designed with precise mechanical and automated process including seal ring, compression spring and glue with high capacity.
3. Accurate positioning of gluing without valve leakage or non-polluting.
4. Can optionally add high precision air tightness detection inthe whole
Machine function:
Used for automatic assembly of check valve assembly, with automatic loading, automatic assembly, automatic detection, function, Can optionally add valve leakage test function and ultrasonic welding technology.
Machine Specification:
1. Control Mode: PLC Control
2. Machine Size: L2000*W1200*H1800MM
3. Capacity: 2200-6500pcs/hour
4. Voltage: 220V
5. Pressure: 0.6Mpa
6. Power:2KW
7. Weight: 2000KG
8. 0ption：Can optionally add valve leakage test function and ultrasonic welding technology
Technical features:
1. Servo system controls, high-speed automated equipment to produce high quality check valves, final yield up to 99%
2. Designed with precise mechanical and automated process including seal ring, compression spring and glue with high capacity.
3. Accurate positioning of gluing without valve leakage or non-polluting.
4. Can optionally add high precision air tightness detection inthe whole
Machine name: Automated Assembly Machines for Endotracheal Tube
Machine function: Equipped with beveling, tip-forming, Murphy hole, side holes and assembly connectors functions.
Machine Specification:
1. Control Mode: PLC Control
2. Machine Size: L2700*W1500*H1800MM
3. Capacity: 700pcs/hour
4. Voltage: 220V
5. Pressure: 0.6Mpa
6. Power:5KW
7. Weight: 1000KG
8. General: Size range from FR6.0-8.5
Technical features:
1. High-precision forming mold with thermoforming process to ensure the consistency of the tip-forming.
2. Hot punching hole has smooth surface, more comfortable,reduce the damage to human.
3. Camera CCD technology can be optionally be added to detect the accuracy of the tip-forming size.
Machine function: Equipped with beveling, tip-forming, Murphy hole, side holes and assembly connectors functions.
Machine Specification:
1. Control Mode: PLC Control
2. Machine Size: L2700*W1500*H1800MM
3. Capacity: 700pcs/hour
4. Voltage: 220V
5. Pressure: 0.6Mpa
6. Power:5KW
7. Weight: 1000KG
8. General: Size range from FR6.0-8.5
Technical features:
1. High-precision forming mold with thermoforming process to ensure the consistency of the tip-forming.
2. Hot punching hole has smooth surface, more comfortable,reduce the damage to human.
3. Camera CCD technology can be optionally be added to detect the accuracy of the tip-forming size.
Technical features:
1.Full automatic production process from material feeding to finished products discharging.
2.Unique glue technology, can achieved quantitative dispensing glue.
3.Advanced tip-forming technology with RF generator, hot punching, and surface is smoother.
4.High compatibility: Available for different sizes.
5.CCD technology can be optionally be added to detect the tip-forming size of the tube.
Machine function:
The material can offer a wide range of urethral catheters in the same assembly
line, size from FR6-26, length from 120-400mm. It is available in a quick and easy setup when
running many gauge sizes. The machine has advanced tip-forming technology with RF
generator Deliver clean eyelet punch-outs. At the same time, this machine also has superior
vision inspection technology with high positioning setting of glue.
Machine Specification:
1.Power distribution: 220V, 20kW.
2.Machine Size:L4500*W1200*H1800MM
3.Capacity: 1200-3600pcs/hour
4.Pressure: 0.6Mpa
5.Weight:
1.Full automatic production process from material feeding to finished products discharging.
2.Unique glue technology, can achieved quantitative dispensing glue.
3.Advanced tip-forming technology with RF generator, hot punching, and surface is smoother.
4.High compatibility: Available for different sizes.
5.CCD technology can be optionally be added to detect the tip-forming size of the tube.
Machine function:
The material can offer a wide range of urethral catheters in the same assembly
line, size from FR6-26, length from 120-400mm. It is available in a quick and easy setup when
running many gauge sizes. The machine has advanced tip-forming technology with RF
generator Deliver clean eyelet punch-outs. At the same time, this machine also has superior
vision inspection technology with high positioning setting of glue.
Machine Specification:
1.Power distribution: 220V, 20kW.
2.Machine Size:L4500*W1200*H1800MM
3.Capacity: 1200-3600pcs/hour
4.Pressure: 0.6Mpa
5.Weight:
Machine Name: Endotracheal Tube Spring Assembly Machine
Material: aluminum alloy
Function: to get the spring into the trachea intubation tube body more smoothly.
Machine features:
1. Equipment: Trachea intubation spring assembly machine.
2. Reinforce the tracheal tube and make it softer and less harmful to human tissue.
3. Power supply: 220-240V/1Ph/50Hz.
4. Shell: stainless steel 304-2B.
5. Capacity: 1500pcs/hour.
Material: aluminum alloy
Function: to get the spring into the trachea intubation tube body more smoothly.
Machine features:
1. Equipment: Trachea intubation spring assembly machine.
2. Reinforce the tracheal tube and make it softer and less harmful to human tissue.
3. Power supply: 220-240V/1Ph/50Hz.
4. Shell: stainless steel 304-2B.
5. Capacity: 1500pcs/hour.
Machine Name: Ethylene Oxide Sterilizer
Material: aluminum alloy
Function: comprehensive sterilization and disinfection of medical consumable products, safer product use.
Machine features:
1.Equipment: 15m³ ethylene oxide sterilization machine.
2.Sterilization pressure: -80~+80 kpa.
3. Sterilization humidity: 20-100%RH, adjustable (direct type).
4. Sterilization time: 8-12 hours.
5. Maximum electric heating power: 54KW.
6. Power supply: 380V/3Ph/50Hz (5 wires).
7. Dimensions (L/W/H): 6750x1350x1700mm.
Material: aluminum alloy
Function: comprehensive sterilization and disinfection of medical consumable products, safer product use.
Machine features:
1.Equipment: 15m³ ethylene oxide sterilization machine.
2.Sterilization pressure: -80~+80 kpa.
3. Sterilization humidity: 20-100%RH, adjustable (direct type).
4. Sterilization time: 8-12 hours.
5. Maximum electric heating power: 54KW.
6. Power supply: 380V/3Ph/50Hz (5 wires).
7. Dimensions (L/W/H): 6750x1350x1700mm.
Machine Name: Flexible Plastic Packaging Machine
Material: aluminum alloy
Function: it can realize soft and hard plastic on-line packing, also can realize on-line label printing. Save time and human total cost, improve packing efficiency.
Machine features:
1. Including molding, sealing and cutting molds.
2. Flexo or inkjet printer is optional.
3. Power supply: 380V/3Ph/50Hz. 5.
4. Maximum input power: 10KW.
5. Shell: stainless steel 304-2B.
6. Net weight: 1500kg.
7. Dimensions (L/W/H): 7300x1100x1750mm.
Material: aluminum alloy
Function: it can realize soft and hard plastic on-line packing, also can realize on-line label printing. Save time and human total cost, improve packing efficiency.
Machine features:
1. Including molding, sealing and cutting molds.
2. Flexo or inkjet printer is optional.
3. Power supply: 380V/3Ph/50Hz. 5.
4. Maximum input power: 10KW.
5. Shell: stainless steel 304-2B.
6. Net weight: 1500kg.
7. Dimensions (L/W/H): 7300x1100x1750mm.
Machine Name: Bending Oven
Material: aluminum alloy
Function: used for bending of tracheal cannula, the tube body will be shaped by high temperature.
Machine features:
1. Power distribution: 220V, 1.5KW.
2. Capacity: 1000-1200pcs/hour.
3. Temperature: 120-130℃.
4. Molding time: 20 minutes.
5. Size (L/W/H): 1350x1120x720mm.
Material: aluminum alloy
Function: used for bending of tracheal cannula, the tube body will be shaped by high temperature.
Machine features:
1. Power distribution: 220V, 1.5KW.
2. Capacity: 1000-1200pcs/hour.
3. Temperature: 120-130℃.
4. Molding time: 20 minutes.
5. Size (L/W/H): 1350x1120x720mm.
Machine name: Printing machine (pad printing machine)
Material: aluminum alloy
Function: print any information needed by the customer on the tube.
Machine features:
1. Distribution: 220V/50Hz, 60W.
2. Size: 55x12.5cm.
3. Ink cup size: 9cm.
4. Air pressure: 5 bars.
5.Dimensions (L/W/H): 720 x 360 x 1380mm.
Material: aluminum alloy
Function: print any information needed by the customer on the tube.
Machine features:
1. Distribution: 220V/50Hz, 60W.
2. Size: 55x12.5cm.
3. Ink cup size: 9cm.
4. Air pressure: 5 bars.
5.Dimensions (L/W/H): 720 x 360 x 1380mm.
Equipment Name: Bevel Cutting Machine
Material: aluminum alloy
Function: for cutting trachea cannula beveling angle, generally 37-45 degrees.
Machine features:
1. Used for cutting the beveled angle of trachea cannula.
2. Production capacity: 800-1000 pcs per hour.
3. Power supply: 220-240V, 1.5KW, 6㎡ copper core.
4. Cutting angle can be adjusted correspondingly.
5. THK mechanical module, driven by cold air technology.
6. Japan SMC pumping technology.
7. Equipped with knives and accessories.
8. Dimensions (L/W/H): 415x250x335mm.
Material: aluminum alloy
Function: for cutting trachea cannula beveling angle, generally 37-45 degrees.
Machine features:
1. Used for cutting the beveled angle of trachea cannula.
2. Production capacity: 800-1000 pcs per hour.
3. Power supply: 220-240V, 1.5KW, 6㎡ copper core.
4. Cutting angle can be adjusted correspondingly.
5. THK mechanical module, driven by cold air technology.
6. Japan SMC pumping technology.
7. Equipped with knives and accessories.
8. Dimensions (L/W/H): 415x250x335mm.
Equipment Name: Side Hole (Inflatable Hole) Punching Machine
Material: aluminum alloy
Function: On the tracheal cannula, punch the side holes for connecting the inflatable components. And punch holes at the position of the balloon for inflating the balloon.
Equipment features:
1. For punching side holes.
2. Production capacity: 800-1000 pcs per hour.
3. Compressed air: 6-8kgs, pipe joint diameter: 8mm.
4. THK mechanical module, driven by cold air technology.
5. Japan SMC pumping technology.
6. Equipped with cutter and accessories.
7. Dimensions (L/W/H): 250x250x500 mm.
Material: aluminum alloy
Function: On the tracheal cannula, punch the side holes for connecting the inflatable components. And punch holes at the position of the balloon for inflating the balloon.
Equipment features:
1. For punching side holes.
2. Production capacity: 800-1000 pcs per hour.
3. Compressed air: 6-8kgs, pipe joint diameter: 8mm.
4. THK mechanical module, driven by cold air technology.
5. Japan SMC pumping technology.
6. Equipped with cutter and accessories.
7. Dimensions (L/W/H): 250x250x500 mm.
Machine name: Ethylene Oxide Sterilizer
Material: Aluminum Alloy
Function: Sterilize the product to make it safer while using.
Product details:
1.Item: 15m³Ethylene Oxide Sterilizer.
2.Sterilizing pressure: -80~+80 kpa.
3.Sterilizing humidity: 20-100%RH, adjustable (direct type).
4.Sterilizing time: 8-12 hours.
5.Max. electrical heating power: 54KW.
6.Power supply: 380V/3Ph/50Hz (5-wire).
7.Dimension (L/W/H): 6750x1350x1700mm.
Material: Aluminum Alloy
Function: Sterilize the product to make it safer while using.
Product details:
1.Item: 15m³Ethylene Oxide Sterilizer.
2.Sterilizing pressure: -80~+80 kpa.
3.Sterilizing humidity: 20-100%RH, adjustable (direct type).
4.Sterilizing time: 8-12 hours.
5.Max. electrical heating power: 54KW.
6.Power supply: 380V/3Ph/50Hz (5-wire).
7.Dimension (L/W/H): 6750x1350x1700mm.
Operating hours
Marketing team and technical team are our main strengths for building our reputation and long-term partnership with our overseas partners/customers, featuring efficient communication and reliable pre-sales & post-sales technical support. Since 2010s, we have cooperated with exceed 500 companies around the world, markets occupies mainly including Asian...
Products
Contact with us
Zhongshan Centurial Medical Technology Co.,Ltd
Company Address: C301, 3th Floor, No.3 Hongtu Street, Hongji Road, Shiqi District, 528400, Zhongshan City, Guangdong Province, China.
Company email: info@centurial.com.cn
Company tel: +86 760 8878 8984
Contact person: Mr. Jim Yang
Contact email: jimyang@centurial.com.cn
Contact mob./Wechat/Whatsapp/Skype: +86 15800109414
Copyright © 2026 Centurial| -https://www.centurial.com.cn/ Sitemap