Endotracheal tube production line machine
Send your inquiry
Product details:
Equipment name: Double highfrequency tip forming machine
Material: aluminum alloy
Function: the tip forming machine is equipped with a cooling device, which is used for the tip forming of tracheal intubation, tracheotomy tube, intravenous intubation, aortic intubation machine, as well as sputum tube, gastric tube, feeding tube, and other large-size catheters, etc., so as to make them smoother , softer, and not easy to hurt the patient's respiratory tract.
Equipment features:
The machine is equipped with 2 sets of high frequency sensor heaters,and including the chiller.
which will produce high frequency current when working, remember not
to touch by hand
Working power supply: single-phase 220V AC 50Hz
Rated power: a maximum of 15KW
Operating air pressure: 0. 5-0.7MPa
Capacity: 1000pcs/ hour
Dimension:880*1220*1300mm
Weight:120kg
Equipment name: Double highfrequency tip forming machine
Material: aluminum alloy
Function: the tip forming machine is equipped with a cooling device, which is used for the tip forming of tracheal intubation, tracheotomy tube, intravenous intubation, aortic intubation machine, as well as sputum tube, gastric tube, feeding tube, and other large-size catheters, etc., so as to make them smoother , softer, and not easy to hurt the patient's respiratory tract.
Equipment features:
The machine is equipped with 2 sets of high frequency sensor heaters,and including the chiller.
which will produce high frequency current when working, remember not
to touch by hand
Working power supply: single-phase 220V AC 50Hz
Rated power: a maximum of 15KW
Operating air pressure: 0. 5-0.7MPa
Capacity: 1000pcs/ hour
Dimension:880*1220*1300mm
Weight:120kg
Machine Name: Endotracheal Tube Spring Assembly Machine
Material: aluminum alloy
Function: to get the spring into the trachea intubation tube body more smoothly.
Machine features:
1. Equipment: Trachea intubation spring assembly machine.
2. Reinforce the tracheal tube and make it softer and less harmful to human tissue.
3. Power supply: 220-240V/1Ph/50Hz.
4. Shell: stainless steel 304-2B.
5. Capacity: 1500pcs/hour.
Material: aluminum alloy
Function: to get the spring into the trachea intubation tube body more smoothly.
Machine features:
1. Equipment: Trachea intubation spring assembly machine.
2. Reinforce the tracheal tube and make it softer and less harmful to human tissue.
3. Power supply: 220-240V/1Ph/50Hz.
4. Shell: stainless steel 304-2B.
5. Capacity: 1500pcs/hour.
Machine Name: Ethylene Oxide Sterilizer
Material: aluminum alloy
Function: comprehensive sterilization and disinfection of medical consumable products, safer product use.
Machine features:
1.Equipment: 15m³ ethylene oxide sterilization machine.
2.Sterilization pressure: -80~+80 kpa.
3. Sterilization humidity: 20-100%RH, adjustable (direct type).
4. Sterilization time: 8-12 hours.
5. Maximum electric heating power: 54KW.
6. Power supply: 380V/3Ph/50Hz (5 wires).
7. Dimensions (L/W/H): 6750x1350x1700mm.
Material: aluminum alloy
Function: comprehensive sterilization and disinfection of medical consumable products, safer product use.
Machine features:
1.Equipment: 15m³ ethylene oxide sterilization machine.
2.Sterilization pressure: -80~+80 kpa.
3. Sterilization humidity: 20-100%RH, adjustable (direct type).
4. Sterilization time: 8-12 hours.
5. Maximum electric heating power: 54KW.
6. Power supply: 380V/3Ph/50Hz (5 wires).
7. Dimensions (L/W/H): 6750x1350x1700mm.
Machine Name: Flexible Plastic Packaging Machine
Material: aluminum alloy
Function: it can realize soft and hard plastic on-line packing, also can realize on-line label printing. Save time and human total cost, improve packing efficiency.
Machine features:
1. Including molding, sealing and cutting molds.
2. Flexo or inkjet printer is optional.
3. Power supply: 380V/3Ph/50Hz. 5.
4. Maximum input power: 10KW.
5. Shell: stainless steel 304-2B.
6. Net weight: 1500kg.
7. Dimensions (L/W/H): 7300x1100x1750mm.
Material: aluminum alloy
Function: it can realize soft and hard plastic on-line packing, also can realize on-line label printing. Save time and human total cost, improve packing efficiency.
Machine features:
1. Including molding, sealing and cutting molds.
2. Flexo or inkjet printer is optional.
3. Power supply: 380V/3Ph/50Hz. 5.
4. Maximum input power: 10KW.
5. Shell: stainless steel 304-2B.
6. Net weight: 1500kg.
7. Dimensions (L/W/H): 7300x1100x1750mm.
Machine Name: Bending Oven
Material: aluminum alloy
Function: used for bending of tracheal cannula, the tube body will be shaped by high temperature.
Machine features:
1. Power distribution: 220V, 1.5KW.
2. Capacity: 1000-1200pcs/hour.
3. Temperature: 120-130℃.
4. Molding time: 20 minutes.
5. Size (L/W/H): 1350x1120x720mm.
Material: aluminum alloy
Function: used for bending of tracheal cannula, the tube body will be shaped by high temperature.
Machine features:
1. Power distribution: 220V, 1.5KW.
2. Capacity: 1000-1200pcs/hour.
3. Temperature: 120-130℃.
4. Molding time: 20 minutes.
5. Size (L/W/H): 1350x1120x720mm.
Machine name: Printing machine (pad printing machine)
Material: aluminum alloy
Function: print any information needed by the customer on the tube.
Machine features:
1. Distribution: 220V/50Hz, 60W.
2. Size: 55x12.5cm.
3. Ink cup size: 9cm.
4. Air pressure: 5 bars.
5.Dimensions (L/W/H): 720 x 360 x 1380mm.
Material: aluminum alloy
Function: print any information needed by the customer on the tube.
Machine features:
1. Distribution: 220V/50Hz, 60W.
2. Size: 55x12.5cm.
3. Ink cup size: 9cm.
4. Air pressure: 5 bars.
5.Dimensions (L/W/H): 720 x 360 x 1380mm.
Equipment Name: Bevel Cutting Machine
Material: aluminum alloy
Function: for cutting trachea cannula beveling angle, generally 37-45 degrees.
Machine features:
1. Used for cutting the beveled angle of trachea cannula.
2. Production capacity: 800-1000 pcs per hour.
3. Power supply: 220-240V, 1.5KW, 6㎡ copper core.
4. Cutting angle can be adjusted correspondingly.
5. THK mechanical module, driven by cold air technology.
6. Japan SMC pumping technology.
7. Equipped with knives and accessories.
8. Dimensions (L/W/H): 415x250x335mm.
Material: aluminum alloy
Function: for cutting trachea cannula beveling angle, generally 37-45 degrees.
Machine features:
1. Used for cutting the beveled angle of trachea cannula.
2. Production capacity: 800-1000 pcs per hour.
3. Power supply: 220-240V, 1.5KW, 6㎡ copper core.
4. Cutting angle can be adjusted correspondingly.
5. THK mechanical module, driven by cold air technology.
6. Japan SMC pumping technology.
7. Equipped with knives and accessories.
8. Dimensions (L/W/H): 415x250x335mm.
Equipment Name: Side Hole (Inflatable Hole) Punching Machine
Material: aluminum alloy
Function: On the tracheal cannula, punch the side holes for connecting the inflatable components. And punch holes at the position of the balloon for inflating the balloon.
Equipment features:
1. For punching side holes.
2. Production capacity: 800-1000 pcs per hour.
3. Compressed air: 6-8kgs, pipe joint diameter: 8mm.
4. THK mechanical module, driven by cold air technology.
5. Japan SMC pumping technology.
6. Equipped with cutter and accessories.
7. Dimensions (L/W/H): 250x250x500 mm.
Material: aluminum alloy
Function: On the tracheal cannula, punch the side holes for connecting the inflatable components. And punch holes at the position of the balloon for inflating the balloon.
Equipment features:
1. For punching side holes.
2. Production capacity: 800-1000 pcs per hour.
3. Compressed air: 6-8kgs, pipe joint diameter: 8mm.
4. THK mechanical module, driven by cold air technology.
5. Japan SMC pumping technology.
6. Equipped with cutter and accessories.
7. Dimensions (L/W/H): 250x250x500 mm.
Machine name: PVC balloon crimping machine
Material: aluminum alloy
Function: The balloon is fixed by welding and heating, no need to use glue, which improves the production efficiency.
Machine features:
1. Item: PVC balloon crimping machine.
2. Used for gluing balloon to tracheal cannula.
3. Production capacity: 800-1000 pieces/hour.
4. Power supply: 220-240V, 7KW, 4㎡ copper core.
5. Compressed air: 6-8kgs, pipe joint diameter: 12mm.
6. Mitsubishi PLC control system with high efficiency performance.
7. Note: Connector size Including 5.0-10.0mm.
8. Dimensions (L/W/H): 480x500x885mm.
Material: aluminum alloy
Function: The balloon is fixed by welding and heating, no need to use glue, which improves the production efficiency.
Machine features:
1. Item: PVC balloon crimping machine.
2. Used for gluing balloon to tracheal cannula.
3. Production capacity: 800-1000 pieces/hour.
4. Power supply: 220-240V, 7KW, 4㎡ copper core.
5. Compressed air: 6-8kgs, pipe joint diameter: 12mm.
6. Mitsubishi PLC control system with high efficiency performance.
7. Note: Connector size Including 5.0-10.0mm.
8. Dimensions (L/W/H): 480x500x885mm.
Equipment Name: Blow Molding Machine
Material: aluminum alloy
Function: Produce PVC tracheal cannula balloon and indication bubble.
Equipment features:
1. Item: Blow Molding Machine.
2. Extruder: 7.5kw SEW motor with gear coupling reducer.
3. 40mm diameter PVC screw with L/D ratio 24:1.
4. PVC primary pellet output 18kgs/h.
5. Screw made of high quality 42 CrMo steel, chrome plated.
6. Bimetallic barrel to improve wear resistance.
7. SEW-Eurodrive motor gearbox.
8. Stainless steel hopper.
9. Mold clamping force: 3000kgs.
10. Dimensions (L/W/H): 1434x2200x2184mm.
Material: aluminum alloy
Function: Produce PVC tracheal cannula balloon and indication bubble.
Equipment features:
1. Item: Blow Molding Machine.
2. Extruder: 7.5kw SEW motor with gear coupling reducer.
3. 40mm diameter PVC screw with L/D ratio 24:1.
4. PVC primary pellet output 18kgs/h.
5. Screw made of high quality 42 CrMo steel, chrome plated.
6. Bimetallic barrel to improve wear resistance.
7. SEW-Eurodrive motor gearbox.
8. Stainless steel hopper.
9. Mold clamping force: 3000kgs.
10. Dimensions (L/W/H): 1434x2200x2184mm.
Equipment name: PVC pipe tip forming machine and chiller
Material: aluminum alloy
Function: the tip forming machine is equipped with a cooling device, which is used for the tip forming of tracheal intubation, tracheotomy tube, intravenous intubation, aortic intubation machine, as well as sputum tube, gastric tube, feeding tube, and other large-size catheters, etc., so as to make them smoother , softer, and not easy to hurt the patient's respiratory tract.
Equipment features:
1. Equipment: high-frequency tip molding machine.
2. Used for tracheal tube insertion or other large tube tip molding.
3. Output capacity: 1500pcs/hour.
4. Power supply: 220-240V, 3.5KW, 4 square meters copper core.
5. Compressed air: 6-8kgs, pipe joint diameter: 12mm.
6. Mitsubishi PLC control system.
7. Note: Dimensions of tip molding fittings. Including 2.0-10.0mm.
8. Dimensions (L/W/H): 900x700x200mm.
Material: aluminum alloy
Function: the tip forming machine is equipped with a cooling device, which is used for the tip forming of tracheal intubation, tracheotomy tube, intravenous intubation, aortic intubation machine, as well as sputum tube, gastric tube, feeding tube, and other large-size catheters, etc., so as to make them smoother , softer, and not easy to hurt the patient's respiratory tract.
Equipment features:
1. Equipment: high-frequency tip molding machine.
2. Used for tracheal tube insertion or other large tube tip molding.
3. Output capacity: 1500pcs/hour.
4. Power supply: 220-240V, 3.5KW, 4 square meters copper core.
5. Compressed air: 6-8kgs, pipe joint diameter: 12mm.
6. Mitsubishi PLC control system.
7. Note: Dimensions of tip molding fittings. Including 2.0-10.0mm.
8. Dimensions (L/W/H): 900x700x200mm.
Equipment features:
1. Equipment: PVC pipe body extruder.
2. High-strength precision nitrided alloy steel screw.
3. Heating power: 19.5kw.
4. Control system: Siemens HMI system.
5.Siemens motor.
6.Medical grade puller and cutter combination.
7.Intelligent micro-computerized cutting.
8.Including 2.0-10.0mm tip molding jig.
9.Floor space 10.5mx1.3x2.1m.
1. Equipment: PVC pipe body extruder.
2. High-strength precision nitrided alloy steel screw.
3. Heating power: 19.5kw.
4. Control system: Siemens HMI system.
5.Siemens motor.
6.Medical grade puller and cutter combination.
7.Intelligent micro-computerized cutting.
8.Including 2.0-10.0mm tip molding jig.
9.Floor space 10.5mx1.3x2.1m.
no data
Operating hours
Marketing team and technical team are our main strengths for building our reputation and long-term partnership with our overseas partners/customers, featuring efficient communication and reliable pre-sales & post-sales technical support. Since 2010s, we have cooperated with exceed 500 companies around the world, markets occupies mainly including Asian...
Products
Contact with us
Zhongshan Centurial Medical Technology Co.,Ltd
Company Address: C502, 5th Floor, No.3 Hongtu Street, Hongji Road, Shiqi District, 528400, Zhongshan City, Guangdong Province, China.
Company email: info@centurial.com.cn
Company tel: +86 760 8878 8984
Contact person: Ms. Linnea LlN
Contact email: linnealin@centurial.com.cn
Contact mob./Wechat/Whatsapp/Skvpe: +86 17666371196
Copyright © 2025 Centurial| -https://www.centurial.com.cn/ Sitemap